3/4 Inch Stainless Steel Flow Meter - Reads in GPM and LPM


Flow Meters for Industrial Applications > Turbine Flow Meters - G2 Series Industrial Grade Models > Stainless Steel Flow Meters - G2 Industrial Grade Meters > Item # G2S07I62LMC

Save To Favorites

3/4" stainless steel flow meter with ISO fittings, remote 4-20 mA transmitter with display and open collector sensor.

Specifications

Design Type		Turbine

Housing Material		316 Stainless Steel

Fitting Type		ISO

Turbine Size		3/4 Inch

Accuracy (% of Reading - Turbine Only)		± 1.5 %

Accuracy (% of Reading - Turbine with Computer)		± 1.0 %

Repeatability		±0.1 %

Operating Temperature Range		-40 to 250 ºF -40 to 121 ºC

Operating Temperature Range with Computer		0 to 140 ºF -18 to 60 ºC

Typical K-Factor		1,100

Wetted Material Housing		316 Stainless Steel

Wetted Material Bearings		Ceramic

Wetted Material Shaft		Tungsten Carbide

Wetted Material Rotor		PVDF

Wetted Material Rings		316 Stainless Steel

Frequency Range		37 - 370 Hz at 2 - 20 GPM

Recommended Strainer Size		55 mesh

Maximum Flow		30 GPM 113.6 LPM

Wrench Flat Size		1 5/16 Inch 33 mm

Shipping Weight		2.5 lbs. 1.1 kg

Shipping Weight with Turbine Only		2.3 lbs 1 kg

Reads		Gallons Litres

Electronic Choice		62 - Remote 4-20 mA Transmitter (with Display and Open

Approvals		ATEX ANNEX VIII II 3 G larger image CE larger image EEx nL IIC T4 U larger image Factory Mutual Approved larger image Ingress Protection Code larger image NEMA 4 larger image Underwriters Laboratories - cUL larger image

Flow Range		2 to 20 GPM 7.6 to 75.7 LPM

Pressure Rating		1500 psi 102 bar

DOWNLOADS


		Built Your Own Meter (PDF, 270KB)

		Dimensional Drawing (JPG, 45KB)

		Liquid Viscosities - Ver. 6 (PDF, 36KB)

		Chemical-Compatibility-Ver-6 (PDF, 53KB)

		Manual 1 (PDF, 145KB)

		Industrial Grade Turbine Housing Manual (PDF, 170KB)

		4-20 mA Output Electronics Manual (PDF, 330KB)

		GPI-Industrial-Meter-Catalog-Version-7-Page-16 (PDF, 84KB)

Item # G2S07I62LMC